SANUS Full-Motion TV Mount for 32"-55" w/ cable tunnels & 10' HDMI

Needed one of these mounts so I could put up a TV in a spare/guest bedroom. I am very pleased with the the SANUS VuePoin. The F215KIT is a complete all-in-one kit for a professional looking finish. The versatile full-motion wall mount fits most 32" – 55" flat-panel TVs up to 50 lb which is great as most TVs weigh far less than this and the 42" is less than 10 lbs. It has full range of movement allows smooth extend, tilt, swivel and roll motions up to 15" from the wall without the use of tools. It tilts with the touch of a finger, making it easy to reduce glare. Cable management system conceals and organizes cables for a seamless appearance.I don't have mine hooked up to cable TV so that eliminates some of the cables. It also includes a 9.8' 4k HDMI 2.0 cable and two 10" cable tunnels. Includes a 5-year limited warranty. Extends 15" from the wall; comes with cable covers and 4k HDMI 2.0. Recommend you get one of these from Walmart!

Hands down this has been the easiest mount I have ever used for a TV.The box even provided info for an installation video. We put it in the corner of out bedroom and couldn't be happier, it is so easy to move wherever I want it moves so smoothly and keeps the glare away. We were able to level it within just a minute after we installed it. We don't have a bunch of ugly cords showing on the wall because it came with cable tunnels and a HDMI cord!

This mount feels very well made and heavy duty. There are some plastic pieces surrounding the metal. Sanus makes installation as easy as possible with thorough instructions, videos, and a paper template to place the mount. I like that it is installed onto a single wall stud with just two screws. It can be installed on concrete walls with an additional accessory kit. It supports 11 different VESA mount patterns, basically all combinations of 100-400. The included HDMI cable and cable tunnels are a nice bonus. It has decent range of motion at 15 in. extension, 45 degree swivel each side. It tilts down 50 degrees but up only 5 degrees. I hoped to use this mount on a sloped cape cod bedroom wall, but ultimately, it won't suit that purpose, as we need something that can tilt more up as opposed to down, and I would not install this bracket upside down as it clearly has a directional design. I'll happily use this mount in another room when I get more TVs, and I'd recommend it to others seeking a solid mount that tilts and rotates, for installation on a regular straight wall.

SANUS Full-Motion TV Mount for 32-55 w/ cable tunnels & 10' HDMI This product is just what we needed. Easy to install, easy to level after installation, and very versatile movement--tilt, side-to-side, and even in/out. This TV mount also comes with a 10' 4K HDMI cable and a method to conceal the cables.

So yep normally my husband “needs” to install these mounts! Not only was it super simple to Mount but even adding the 50” TV onto it was super simple! At first I tried a32”! Both moved flawlessly with this Mount! The thing just feels heavy duty/high quality! We have one for a 65” & honestly this one feels much more reliable than the other! It's quite awesome! We have ours in our room, which happens to be my office as well! Horrible idea right?! lol. Well this Mount really helps make it kinda separated! Being able to turn the screen instead of moving myself, has been a huge thing! It's not so much laziness! But it was frustrating! This Mount has honestly removed this inconvenience! Especially when needing to see our security cameras! It's not something I need to watch 24/7! But having to go out of my way to glance does become annoying! But when you Can adjust your tv to accommodate to your own needs...... it honestly helps more than you'll ever imagine! I'd definitely recommend this item! Anyone can install & use it! & the small extras included to hide the wires never dentures customers, right!? Those are simple as well! Great item & totally worth it!

I had a TV sitting on a TV stand and at night laying in bed, if I moved at all or the covers moved up, it would block half the screen, so when I saw this TV mount I wished I had thought of it before. I have mounted TV's in the past and not one of them was easy. First I always buy Samsung TV's and I've never had a mount set with the right hardware to fit a Samsung well, but this mount had the exact size for everything. It had a lot of choices for hardware, depending on the model and size of TV you're hanging and also hardware specific to where and what you're hanging it on. It had a template that made it very easy. I hung this Samsung 47” TV, by myself in less than 45 minutes. And I didn't curse once. Not only do I recommend this—I will only use this kind in the future.

LOVE the functionality of the mount. I can move my 60" TV up, down, side to side, it swivels and it tilts. So no matter where you are in the room everyone can see it. I can get rid of my huge entertainment center and just buy a smaller media shelf to go under the TV. My family loves this mount and I love the extra space! I want to note that my husband had all the tools needed to install this mount. He used a level, a cordless drill with screw drivers, a bolt and ratchet set to tighten, and a stud finder. All of those tools aren't necessary, but it helped make the installation process easier.

It was the first time mounting a TV and this was easy to install. My husband took about 30 mins to install. We wanted one that would tilt up and down and turn side to side and this one can easily do both of that. We love having the extra floor space under the TV by using this mount.

I've been wanting to move my 42” flat bedroom TV to the wall for some time to make more room. I knew that I was going to have to install this myself since my husband had carpal tunnel surgery recently. First thing that I did was take everything out of the box and lay it on the bed. Then I watched the video on the Sanus website to get an idea of what I was supposed to do. For me, the hardest part of this entire installation was both finding a stud in the wall, and finding my husband's tools. I had a studfinder, but it was definitely not reliable. I ended up putting about five nail holes in the wall trying to find solid wood. You will need to find solid wood to mount this on, since it's very heavy with the TV attached. Once I found the stud I attached the included template onto the wall with tape, and made sure it was level. I found the correct size drillbit and drilled two holes deep into the wood where the holes were on the template. Then I screwed the metal sheet that attaches to the TV onto the TV with the included screws. There should be screw holes in the back of your TV just for this purpose. Make sure that the Arrow is pointing up. My TV is only 42” so I didn't have to use the extra extenders that come with the kit. The kit includes a ton of screws in different sizes. There's no reason that you wouldn't find the size that you need for your TV. Next I screwed the wall mount part to the wall. You will need a ratchet wrench for this part. I think that it used a ½” attachment. This screw is long and it took me some time to screw it all the way in, but with the ratchet, it wasn't all that hard to do. Make sure it's tight to the wall but not over tightened. And make sure that the correct end is pointing up. You'll have to hang the TV from it next. The TV then gets hung over the top of the wall mount. If it's a heavy TV you'll need help lifting it. Then finally you put a screw and washer into the bottom of the wall mount and that holds the TV tight. And that's about all you have to do. The kit does come with a plastic tunnel for sticking to the wall and hiding the wires if you want to use it. I haven't installed that yet. It can be painted. So, I did manage to do this installation myself. If I'd have been able to find the stud easily and find the tools I needed easily, it would have taken less than an hour. As it was, it only took me a couple of hours to get the TV hung. And it's sturdy and looks great!

Small and easy to install. Instruction were clear and easy to follow, it comes with all the screws you need to put it up and add your TV. It literally took less than 10 minutes to install and it was ready for us to enjoy watching some TV in the garage. It is so small it doesn't take up any space, this is way better than having a TV stand, the arm is very flexible and moves in whichever direction. It doesn't tilt in case you want one that tilts. But other than that I think this is a great mount for your TV. The range of this is for TV's 32 to 55 inches, we currently have a 32 inch TV on ours. Another great feature is that it comes with cable tunnels, which hides your TV cables, I love how neat it looks without loose cables.