Minwax Helmsman Spar Urethane Satin Finish - Clear - Quart — Residential Use, Standard Application

Great product, very quick drying. Clean brush immediately after use and all is good.

6 hours is the minimum drying time for sanding/recoating. I counsel patience. 12 - 24 hours is what I have always followed and never had a problem. I usually apply 5 coats (which may be extreme). The final finish is spectacular, especially after curing for a minimum of 48 hours. If you're in a hurry and don't have the luxury of time use the Minwax water-based varnish. I'm an ol' guy have used spar varnish for the past 30 years and it's never let me down..

Good quality product. Great shipping speed.

I've been a woodfinishing professional for over forty years and I've been using this product since it first came out and recommend it for all wood finishing projects. The best way to apply it is by the spray method to allow a more evenly flow.. it will never turn “yellow or amber” because its a waterborne product and doesn't have the same resins that the He “oil Based” products have that cause that “yellowing/amber” tone over time. Because its a coalescing film it does not dry the same way as a reactive or evaporative coating and will not “flow' out as smooth as those coatings why it's applied by the brush or roller technique therefore, I recommend spraying or adding an extender or floetrol to allow for a smoother finish for brush and roller.

Ok this is a great product and it sprays undiluted from an hvlp sprayer really well. My complaint is that in my area I have to buy it online. The shipping cost makes it over $100 per gallon.

Using this as the final finish on weathered indoor window sills and counter tops. The finish is silky and smooth. Has brought aged wood back to life.

Hard to find product

I stained and coated 2x a 12" piece of oak, which I left outside and totally exposed for a whole year in Massachusetts. Snow fell on it, UV hit it directly. I covered half of it with opaque tape first … and after the year was over, washed it and removed the tape. There were *absolutely* no signs of aging, cracking, nothing. Couldn't tell which side had been protected. In my book, that is a A+.

I've used many different types of clear coat finishes over the years, spray, brush and wipe on, and this is the most difficult product I've ever used. I HIGHLY suggest using the very best brush you can buy. Anytime I use a new product, I research the info and videos to look for best practices prior to application. I can't get the streaks out of my finish no matter what I try. I'm sure that this is a highly durable product if successfully applied. You will need to be extremely diligent in technique, practice and spare no expense on a professional brush. Probably an outstanding product, but there are much easier clear coats to work with.

i never received my delivery and the seller never emailed me back to get a refund or new item